The palm-sized multi-tool “PockeTool 2.0” is an evolution of the plate tool!

[The world of male multi-tools]

Multi-tool. It is a “hand tool” packed with various tools in a compact body that fits in your hand. Anyway, it is often thought that it is “in time” compared to dedicated tools, but there is a deep world that can be enjoyed because it is a multi-tool.

The 13th serialization that introduces the handsome charm of such a multi-tool is “PockeTool 2.0” ($49.8). It is a folding plate tool with a knife that sets it apart from conventional plate tools, and it is a total of 30 types of multi-tools that mainly have the function of a wrench for tightening and loosening bolts and screws.

“PockeTool 2.0” first appeared in a crowdfunding project. The catch phrase was “Conquer an uninhabited island with this one! Card type 30in1 multi-tool”. Even on TV programs, survival and escape on uninhabited islands have become a staple. If you like this kind of program, your index finger may move involuntarily. Whether or not you can conquer the uninhabited island, I will introduce it as showing a new direction for plate tools.

A plate tool is a multi-tool made by punching out a steel plate such as stainless steel, and is generally a key chain size or card type. It is an item that is highly portable and can be stored or attached to a wallet or key ring. However, since it is just a metal plate, the tools it can be installed are limited, and it is difficult to differentiate it from other products. All have similar features.

It is this “PockeTool 2.0” that breaks through that. By adding a structure called “folding”, we have acquired a cutting method other than a knife that only a full-fledged multi-tool with a handle could have. Also, although it is the size of a card when folded, it transforms into a fine hand tool of about 19 cm when unfolded.

The palm-sized multi-tool “PockeTool 2.0” is an evolution of the plate tool!

▲ Fully deployed. The total length is about 19 cm

The swivel axis, which is the key to folding, has a click feeling at an angle of 90 degrees and can be deployed up to 180 degrees. Since the unfolded plate becomes a handle as it is, it is easy to grip and apply force. This is an important factor in determining ease of use for hand tools.

▲ The blade length of the knife is about 45 mm.

When you unfold a slightly smaller knife, the spring plate inside the handle opens and locks the blade. It is not a powerful lock function because it can be folded as it is when it is stored, but it seems that there is no inconvenience in use.

The knife is a combination of a straight blade and a wave blade. When cutting cloth or rope, it is easier to cut using the wave blade on the turning shaft side. You can also use it at camp.

▲ The sharpness of the straight blade is good.

I cut dried squid at the camp the other day, but the sharpness is good. The squid, which is hard to cut, was also crispy. This is a nice place because many tool knives of this type cannot be cut without a grind.

▲ Wire cutter, which is a unique function of the foldable type.

If it is a general pliers type multi-tool, it is equipped at the base, but it is also equipped with a wire cutter that could not be added with a normal plate tool.

It is located near the swivel axis that connects the plate tools and uses the action of folding the plate. If it is about the size of a wire, it can be easily cut. I think it’s a tool that is surprisingly useful in the outdoor scene because it can cut wires that are used for tying firewood and gardening.

▲ Spoke wrench

A spoke wrench, a tool that tightens parts called nipples that connect the spokes and rims used on the wheels of bicycles and motorcycles. If even one spoke comes off or breaks, it may seriously hinder driving. It is useful for checking regularly before that happens and for dealing with any abnormalities on the go.

▲ Hexagonal bit

Detachable hex bit on the opposite side of the knife. It is a combination type of 4mm, 4.5mm, 5mm, and the place to insert the bit is near the plate turning axis, so I think that you should insert it there and close the plate. I felt it was a little difficult to use because the bit holding was not so tight, but I was able to turn the bolt. I think it can be used when you don’t have a special tool.

▲ There are 6 types of hexagon wrench. There are two types in places not shown in the photo

The standard tool for plate tools is the wrench. It corresponds to a total of 6 types of bolts. The bolt is relatively tight. Since the handle is easy to grip, it is much easier to apply force than the card type one. It’s not as good as a special tool, but it’s far easier to use as a plate tool of this kind.

▲ Protractor

A tool for measuring angles that are useful in custom. 1 memory 22.5 degrees A long line is drawn in 45-degree units, and although it is a rough idea, the angle can be measured.

▲ Ruler (millimeter, inch)

There are rulers in millimeters and inches on the side. Useful when you want to measure a little length on the go. By the way, I used it to check the size that I could take when clamming. Unless you are a person who usually carries a scale for work, I think that you will not use it much, but it feels really convenient to have it. I think the most important thing in carrying a multi-tool is to be able to understand “what tool you carry”.

▲ A flat-blade screwdriver. I used it for model gun maintenance

There is a slightly wider flat-blade screwdriver at the corner of the plate. It’s easy to apply force and use. It can also be used as a clipper to open paint cans.

▲ Phillips screwdriver

There is also a Phillips screwdriver on the diagonal of the flat-blade screwdriver. Like the minus, it is a type that applies torque by pressing it. It’s good to be able to use tools that you will use often without expanding the handles.

Other tools that can be used without unfolding the handle are nail pullers, pulleys and multipurpose wrenches. A pulley is a pulley. It is shaped like a drum. It seems that it is for hanging luggage on a carabiner hook and using pulleys to pull the luggage up and down. It’s one of the highlights of the eccentricity of this multi-tool, and although you’ll rarely use it, it’s a tool with a strong presence.

The multi-purpose wrench next to the protractor is suitable for turning thumbscrews and eye bolts (screws with a ring at the end). This is useful when opening tight screws. It’s not as versatile as pliers, but I think it’s enough to turn a plate-shaped object.

“Pocket Tool 2.0”, which is a multi-tool that is so easy to use just by adding the action of “folding”, may be an item that may create a new trend of new plate tools.

For more information about outdoor knives, please follow Shieldon.

You can also follow us through the following ways:

http://shieldon.moeyuan.com